快穿之辣h娱乐圈,塞东西走路play

Your location: Home- > Company News

Three-level maintenance of sewing equipment


Three-level maintenance of sewing equipment. Equipment maintenance usually contains two meanings, one is the meaning of preventive maintenance and the other is the meaning of production maintenance. The combination of the two is equipment maintenance.

The so-called preventive maintenance refers to regular inspection or regular care before the machine is damaged.

The so-called production maintenance refers to how to reduce production costs and improve product quality maintenance.

Three-level maintenance of sewing equipment

The "three-level maintenance system" for sewing equipment is an effective way to rely on everyone, give full play to the enthusiasm of employees, implement scientific management, and do a good job of equipment maintenance.

Daily maintenance

The daily maintenance of sewing equipment is carried out by the operating staff. For ordinary equipment, the equipment is carefully inspected before and after shifts for 5 to 10 minutes. For key equipment, the equipment is carefully inspected before and after shifts for 10 to 15 minutes. It is required to wipe all parts of the machine and fill it with lubricating oil, so that the equipment is always kept neat, tidy, lubricated and safe. Failure of equipment in the shift should be eliminated in time.

2. Primary maintenance

The machine needs to perform first-level maintenance once a month (one shift). The first-level maintenance is carried out by the operator and guided by the mechanics. The equipment is partially dismantled, inspected and cleaned in accordance with the requirements, clearing the oil passages and pipelines, cleaning the oil lines, linoleum, and oil filters, and adjusting the positioning and coordination gaps of all parts of the equipment. Tighten the loose screws.

3. Secondary maintenance

In addition to the first-level maintenance content, the second-level maintenance is carried out by the mechanical repair and maintenance company. It is carried out every other year to perform partial disassembly inspection and repair of the equipment, replace or repair worn parts, clean, change oil, and inspect and repair electrical parts. Local recovery accuracy meets the requirements of normal machine operation.

shut down
点击这里给我发消息